Canon MB2300 Automobile Electronics User Manual


 
Memory Reception
If the machine was not able to print the received fax, the received fax is stored in the machine's memory.
The FAX Memory lamp is lit and Received in memory. is displayed at the Fax standby screen.
Important
If you unplug the power cord, all faxes stored in the machine's memory are deleted. The next time you
turn the machine on, tap OK after a confirmation screen is displayed. The list of the faxes deleted from
the machine's memory (MEMORY CLEAR REPORT) will be printed.
If the machine receives a fax under one of the following conditions, the received fax will be automatically
stored in the machine's memory.
The machine is set to store received faxes in its memory:
When Do not print is selected for Received documents in Auto print settings under FAX settings,
the received faxes are stored in the machine's memory.
You can print the faxes stored in the machine's memory from the Memory reference screen in the Fax
menu.
Printing a Document in Machine's Memory
Note
To print the received faxes automatically, select Print for Received documents in Auto print
settings under FAX settings.
Auto print settings
An error has occurred on the machine:
If you select Print for Received documents in Auto print settings under FAX settings, a received fax
will be printed automatically. However, if any of the following errors occurs, the received fax will not be
printed. It will instead be stored in the machine's memory.
When the error is resolved, the fax stored in the machine's memory is printed automatically.
The amount of remaining ink is insufficient to print a fax:
Replace the ink tank.
Replacing an Ink Tank
Note
You can set the machine to forcibly print a received fax even if the ink has run out.
Set Print when out of ink in Auto print settings under FAX settings to Print.
However, part or all of the fax may not be printed since the ink has run out.
Also, the contents of the fax will not be stored in the machine's memory.
If the ink has already run out, we recommend that Do not print be selected for Received
documents in Auto print settings under FAX settings to store the received fax in the
machine's memory. After you replace the ink tank and select Print for Received documents in
Auto print settings, the fax stored in the machine's memory will be printed automatically.
Auto print settings
Paper has run out:
655