Filter
Top Products
When Loading the Original on the platen glass:
• Before scanning:
When you select 2-sided for 2-sidedPrintSetting and the preview function is activated, the machine
starts pre-scanning before scanning the original. When pre-scanning is finished, the screen below
(preview screen) is displayed on the LCD.
A. Tap to rotate the original by 180 degrees.
B. Tap to start scanning the original.
C. Tap to rescan the original.
• After scanning:
The screen below appears after scanning each sheet of original.
A. Tap to start scanning the original.
Remove the sheet of original from the platen glass after scanning and load the next sheet on the
platen glass, then tap Scan.
B. Tap to start copying the original already scanned.
Note
• You can add the copying job while printing.
Adding the Copying Job (Reserve copy)
443