Filter
Top Products
13–01 Air Compressor
Inspecting, Bendix
Inspect the air intake line, oil supply and return lines,
and coolant supply and return hoses for tight connec-
tions and general condition. Tighten the connections,
and replace the lines and hoses, as needed. If the
compressor air-intake adapter is loose, remove the
adapter, replace its gaskets, and securely install it.
Check the cooling fins on the compressor crankcase.
Clean the fins if they are clogged with debris.
13–02 Air Compressor
Rebuilding/Replacing,
Bendix
Disassemble, clean, and inspect the air compressor.
Replace all seals, gaskets, springs, and all parts that
are worn or damaged beyond re-use. Replace the air
compressor unloader mechanism components. Use
only genuine Bendix replacement parts or kits. Test
the operation of the unloader mechanism. See
Group 13 of the
Acterra
®
Workshop Manual
for re-
build (or replacement) instructions and test opera-
tions.
NOTE: Bendix factory-rebuilt air compressors
are available from authorized Bendix distribu-
tors, and carry a new compressor warranty.
Air Compressor 13
Acterra Maintenance Manual, March 2000 13/1