Filter
Top Products
IMPORTANT: At each Maintenance Operation Set, in
addition to the maintenance operations listed in this
table, perform all daily, weekly, and monthly mainte-
nance operations listed in the "Pretrip and Post-trip
Inspections and Maintenance" chapter of the
Acterra
®
Driver’s Manual
.
NOTE: Maintenance operations appearing in italics in
this table are for noise emission control components.
Numbers in this table are maintenance operation ref-
erence numbers matching those in the text of this
manual.
Maintenance Operation Sets for Groups 00 through 32
REQUIRED MAINTENANCE OPERATION SET IM M1 M2 M3 M4 M5
Maintenance Operation Number and Operation Description
00–15 Lubrication and Fluid Level Check ••••••
00–16 Lubrication and Fluid Level Check ••••
01–01 Engine-Support Fasteners Checking ••
01–02 Engine Drive Belt Inspecting •••
01–03 Pacbrake Inspecting and Maintenance
*
•••
09–01 Air Cleaner Element Inspecting and Replacing •••
13–01 Air Compressor Inspecting, Bendix •••
13–02 Air Compressor Rebuilding/Replacing, Bendix •
15–01 Alternator, Battery, and Starter Checking ••
20–01 Radiator Cap Checking ••••
20–02 Radiator Pressure Flushing and Coolant Changing ••
20–03
Fan Clutch Checking
••••
25–01 Clutch Release Bearing and Release Cross-Shaft Lubricating ••••••
25–02 Clutch (Pull-Type) Inspecting and Adjusting ••••
25–03 Hydraulic Fluid Level Checking •••••
25–04 Hydraulic Fluid Replacing •
26–01 Manual Transmission Fluid Level Checking •••
26–02 Eaton Fuller and TTC Transmission Fluid Changing and Magnetic Plug Cleaning •
†
••
26–03 Allison, Eaton Fuller, and Meritor Transmission Breather Checking ••••
26–04 Allison Transmission Fluid and Filter Changing •••
26–05 Mercedes-Benz Transmission Fluid Changing and Magnetic Plug Cleaning •
26–06 Mercedes-Benz Transmission Leak Checking •
31–01 Frame Fastener Torque Checking •••
31–02 Fifth Wheel Inspecting ••••••
31–03 Fifth Wheel Lubricating ••••••
32–01 Suspension Inspecting ••••••
32–02 Suspension Lubricating ••••••
General Information 00
Maintenance Operation Sets Tables: 00–08
Acterra Maintenance Manual, January 2007 00/11