Filter
Top Products
IMPORTANT: After performing all operations listed in
this table, perform all daily, weekly, and monthly
maintenance operations listed in the "Pretrip and
Post-Trip Inspections and Maintenance" chapter of
the
Acterra
®
Driver’s Manual
.
NOTE: Numbers in this table are maintenance opera-
tion reference numbers matching those in the text of
this manual.
M1 Maintenance Interval Operations
Maint.
Oper. No.
M1 Maintenance Interval Operations
00–15 Lubrication and Fluid Level Check:
• Clutch Release Bearing and Release Cross-Shaft Lubricating
• Hydraulic Fluid Level Checking
• Manual Transmission Fluid Level Checking
• Fifth Wheel Lubricating
• Suspension Lubricating
• Knuckle Pin Lubricating
• Tie-Rod End Lubricating
• All-Wheel-Drive Front Axle Oil Level Checking
• Axle Lubricant Level Checking
• Driveline Lubricating
• Foot Brake Valve Actuator Lubricating, Bendix E–8P
• Automatic Slack Adjuster Lubricating, Meritor
• Automatic Slack Adjuster Lubricating, Gunite
• Automatic Slack Adjuster Lubricating, Haldex
• Drag Link Lubricating
• Power Steering Reservoir Fluid Level Checking
• Power Steering Gear Lubricating (Ross TAS Series)
• Weatherstrip, Door Latch, and Door Hinge Lubricating
31–02 Fifth Wheel Inspecting
32–01 Suspension Inspecting
33–02 Tie-Rod End Inspecting
35–02 Axle Breather Checking
41–01 Driveline Inspecting
42–01 Air Dryer Inspecting, Bendix AD–9
42–02 Air Brake Valve Inspecting and Leak Checking, Bendix BP–R1
42–04 Air Brake Valve Operation Checking
42–05 Relay Valve Checking, Midland
42–06 Quick Release and Flipper Valves Checking, Midland
42–07 Brake Chamber Inspecting (All Models)
42–09 Automatic Slack Adjuster Checking, Meritor
General Information 00
M1 Maintenance Interval Operations Table: 00–10
Acterra Maintenance Manual, January 2007 00/15