Filter
Top Products
Maintenance Operation 00–15 (see Table 12), sum-
marizes all Lubrication and Fluid Level Check opera-
tions that must be performed at the M1 Maintenance
Interval for Schedules I, II, and III
Maintenance operation numbers given in the table
are reference numbers used to help you find detailed
instructions in the manual on the lubrication or fluid
check.
Maintenance Operation 00–15
M1 Lubrication and Fluid Level Check
Maint.
Oper. No.
Operation Description
25–01 Clutch Release Bearing and Release Cross-Shaft Lubricating
25–03 Hydraulic Fluid Level Checking
26–01 Manual Transmission Fluid Level Checking
31–03 Fifth Wheel Lubricating
32–02 Suspension Lubricating
33–01 Knuckle Pin Lubricating
33–03 Tie-Rod End Lubricating
33–05 All-Wheel-Drive Front Axle Oil Level Checking
35–01 Axle Lubricant Level Checking
41–02 Driveline Lubricating
42–03 Foot Brake Valve Actuator Lubricating, Bendix E–8P
42–10 Automatic Slack Adjuster Lubricating, Meritor
42–20 Automatic Slack Adjuster Lubricating, Gunite
42–22 Automatic Slack Adjuster Lubricating, Haldex
46–02 Drag Link Lubricating
46–03 Power Steering Reservoir Fluid Level Checking
46–05 Power Steering Gear Lubricating
72–01 Weatherstrip, Door Latch, and Door Hinge Lubricating
Table 12, Maintenance Operation 00-15, M1 Lubrication and Fluid Level Check
General Information 00
Lubrication and Fluid Level Check (M1): 00–15
Acterra Maintenance Manual, January 2007 00/21