Filter
Top Products
Maintenance Operation Sets for Groups 00 through 32
REQUIRED MAINTENANCE OPERATION SET IM M1 M2 M3 M4 M5
Maintenance Operation Number and Operation Description
32–03 U-Bolt Torque Checking ••••
*
With frequent use, the Pacbrake Exhaust Brake will operate free of maintenance. However, if the vehicle is used inconsistently, seasonally, or is exposed to
excess moisture, it will be necessary to perform preventative maintenance as instructed in Maintenance Operation 01–03.
†
IM interval does not apply to vehicles with a factory fill of Eaton approved synthetic lubricant.
Table 9, Maintenance Operation Sets for Groups 00 through 32
Maintenance Operation Sets for Groups 33 through 42
REQUIRED MAINTENANCE OPERATION SET IM M1 M2 M3 M4 M5
Maintenance Operation Number and Operation Description
33–01 Knuckle Pin Lubricating ••••••
33–02 Tie-Rod End Inspecting ••••••
33–03 Tie-Rod End Lubricating ••••••
33–04 All-Axle Alignment Checking •••
33–05 All-Wheel-Drive Front Axle Oil Level Checking •••
33–06 All-Wheel-Drive Front Axle Oil Changing •••
33–07 Draw Key Nut Inspecting ••••
35–01 Axle Lubricant Level Checking •••
35–02 Axle Breather Checking ••••••
35–03 Axle Lubricant Changing and Magnetic Plug Cleaning •••
35–04 Two-Speed-Axle Shift Unit Oil Level Checking ••
35–05 Two-Speed-Axle Shift Unit Oil Changing •••
40–01 Wheel Nut Checking •••
41–01 Driveline Inspecting ••••••
41–02 Driveline Lubricating ••••••
42–01 Air Dryer Inspecting, Bendix AD–9 ••••••
42–02 Air Brake Valve Inspecting and Leak Checking, Bendix BP–R1 ••••••
42–03 Foot Brake Valve Actuator Lubricating, Bendix E–8P ••••••
42–04 Air Brake Valve Operation Checking ••••••
42–05 Relay Valve Checking, Midland ••••••
42–06 Quick Release and Flipper Valves Checking, Midland ••••••
42–07 Brake Chamber Inspecting (All Models) ••••••
42–08 Camshaft Bracket Bushing Lubricating ••••
42–09 Automatic Slack Adjuster Checking, Meritor ••••••
42–10 Automatic Slack Adjuster Lubricating, Meritor ••••••
42–11 Automatic Slack Adjuster Inspecting, Meritor ••••
42–12 Air Dryer Checking, Bendix AD–9 •••
General Information00
Maintenance Operation Sets Tables: 00–08
Acterra Maintenance Manual, January 200700/12