Filter
Top Products
46–01 Steering Driveline
Lubricating
Wipe the grease fittings clean. See Fig. 1. Using a
pressure gun, apply a lithium-based grease (NLGI
grade 2) sparingly to the universal joints and slip-joint
splines.
46–02 Drag Link Lubricating
1. Using a clean rag, wipe the dirt from both grease
fittings on the drag link. See Fig. 2.
2. Using a pressure gun, apply multipurpose chas-
sis grease at the grease fittings until old grease
is forced out of the socket.
NOTE: Use multipurpose chassis grease NLGI
grade 1 (6% 12-hydroxy lithium stearate grease)
or NLGI grade 2 (8% 12-hydroxy lithium stear-
ate grease). Grade 2 chassis grease is pre-
ferred.
1
2
3
4
5
1
6
6
10/05/94
f460516a
7
7
1. Pinch Bolt
2. Universal Joint Shaft
3. Bushing
4. Boot
5. Boot Retainer
6. Prevailing Torque Locknut
7. Grease Fitting
Fig. 1, Steering Driveline
Steering 46
Acterra Maintenance Manual, July 2004 46/1