Filter
Top Products
3-33
CHK
ADJ
1
2
1
1
CHECKING THE CANISTER AND ROLL OVER VALVE
CHECKING THE CANISTER AND ROLL
OVER VALVE
The following procedure applies to all of the can-
ister and roll over valve.
1. Remove:
8seat
8trunk
Refer to “COVER AND PANEL”.
2. Check:
8hose (to throttle body) 1
8hose (to roll over valve) 2
Cracks/damage J Replace.
Loose connection J Connect properly.
3. Remove:
8canister 1
4. Check:
8canister
Cracks/damage J Replace.
Obstruction J Blow out with compressed
air.
5. Install:
8canister
TIP
While installing, make sure the canister is routed
correctly.
6. Remove:
8roll over valve 1
Downloaded from www.ScooterTime.net