Filter
Top Products
CHAS
4-7
FRONT WHEEL AND BRAKE DISK
TIP
Tighten the brake disc bolts in stages and in a
crisscross pattern.
Brake disc bolt
23Nm (2.3m • kgf, 16.6ft • lbf)
LOCTITE
®
d. Measure the brake disc deflection.
e. If out of specification, repeat the adjustment
steps until the brake disc deflection is within
specification.
f. If the brake disc deflection cannot be
brought within specification, replace the
brake disc.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS00535
CHECKING THE SPEEDOMETER GEAR
UNIT
1. Check:
8speedometer clutch
Bends/damage/wear Replace.
2. Check:
8speedometer drive gear 1
8speedometer driven gear 2
Damage/wear Replace.
EAS00539
ASSEMBLING THE FRONT WHEEL
1. Install:
8wheel bearing
8spacer
8oil seal
New
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Install the new wheel bearings and oil seal
in the reverse order of disassembly.
NOTICE
Do not contact the wheel bearing inner race
11
11
1 or balls
22
22
2. Contact should be made only
with the outer race
33
33
3.
TIP
Use a socket 4 that matches the diameter of
the wheel bearing outer race and oil seal.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
T
R
.
.
2
1
Downloaded from www.ScooterTime.net