Filter
Top Products
CHAS
4-54
1
2
3
a
b
HANDLEBAR
5. Install:
8 throttle grip assembly 1
8 throttle cable assembly 2
8 right handlebar switch 3
TIP
8 Lubricate the inside of the throttle grip as-
sembly with a thin coat of lithium-soap-
based grease and install it onto the handle-
bar 4.
8 Align the projection a on the right handle-
bar switch with the hole b in the handle-
bar.
WARNING
Make sure the throttle grip operates
smoothly.
6. Install:
8brake master cylinder
Refer to “FRONT BRAKE”.
7. Install:
8band
New
8brush guard (left and right)
8rear view mirror (left and right)
8. Install:
8leg shield 2
8leg shield 1
Refer to “COVER AND PANEL” in chap-
ter 3.
9. Adjust:
8throttle cable free play
Refer to “ADJUSTING THE THROTTLE
CABLE FREE PLAY” in chapter 3.
Throttle cable free play (at the flange
of the throttle grip)
3 ~5mm (0.12 ~ 0.20in)
2
3
1
4
Downloaded from www.ScooterTime.net