Filter
Top Products
3-32
CHK
ADJ
2
1
3
4
5
CHECKING THE EXHAUST SYSTEM
EAS00099
CHECKING THE EXHAUST SYSTEM
The following procedure applies to all of the
muffler and gasket.
1. Remove:
8O
2
sensor coupler
8muffler
Refer to “REAR SHOCK ABSORBER
ASSEMBLIES AND SWINGARM” in
chapter 4.
2. Check:
8muffler 1
Crack/damage J Replace.
8gasket 2
Exhaust gas leak J Replace.
3. Check:
8tightening torque
Exhaust pipe nut
33
33
3
13Nm (1.3m • kgf, 9.4ft • lbf)
Muffler and swingarm bolt
44
44
4
31Nm (3.1m • kgf, 22.4ft • lbf)
Muffler and swingarm bolt
55
55
5
53Nm (5.3m • kgf, 38.3ft • lbf)
4. Install:
8muffler
8O
2
sensor coupler
Refer to “REAR SHOCK ABSORBER
ASSEMBLIES AND SWINGARM” in
chapter 4.
T
R
.
.
Downloaded from www.ScooterTime.net