Filter
Top Products
ENG
5-57
2
3
1
STARTER CLUTCH AND AC MAGNETO
EAS00354
INSTALLING THE AC MAGNETO
1. Install:
8stator coil assembly
8crankshaft position sensor
8woodruff key
8AC magneto rotor
8washer
8AC magneto rotor nut
TIP
8 Clean the tapered portion of the crankshaft
and the AC magneto rotor hub.
8 When installing the AC magneto rotor, make
sure the woodruff key is properly seated in
the keyway of the crankshaft.
T
R
.
.
T
R
.
.
2. Tighten:
8AC magneto rotor nut 2
70 Nm (7.0 m • kgf, 50.6 ft • lbf)
TIP
While holding the AC magneto rotor 1 with the
rotor holding tool 3, tighten the AC magneto rotor
nut.
Rotor holding tool
90890-01235 (YU-01235)
3. Install:
8fan
9Nm (0.9m • kgf, 6.5ft • lbf)
4. Install:
8air shroud cylinder 3
8air guide
Downloaded from www.ScooterTime.net