Yamaha YW125Y_ Utility Trailer User Manual


 
6-33
FI
1
THROTTLE BODY AND FUEL INJECTOR
INSTALLING THE FUEL PUMP
1. Install :
8fuel pump
4Nm (0.4m • kgf, 2.9ft • lbf)
TIP
8 Do not damage the installion surface of the
fuel tank when installing the fuel pump.
8 Always use a new fuel pump gasket.
8 Align the projection a on the fuel pump with
the alignment mark b on the fuel tank.
8 Tighten the fuel pump bolts in the proper
tightening sequence as shown and torque
them in two stages.
A Forward
INSTALLING THE FUEL TANK AND FUEL
HOSE
1. Install :
8fuel tank
10Nm (1.0m • kgf, 7.2ft • lbf)
2. Connect :
8fuel pump coupler
T
R
.
.
T
R
.
.
3. Install :
8fuel hose 1
8fuel return hose
NOTICE
When installing the fuel hose, make sure that
it is securely connected, and that the fuel
hose holders are in the correct position,
otherwise the fuel hose will not be properly
installed.
TIP
8 Install the fuel hose connector securely onto
the fuel tank until a distinct “click” is heard,
and then make sure that it does not come
loose.
8 After instslling the fuel hose, hold fuel hose
connector 1 push to the bottom up and
make sure that it is installed securely.
1
Downloaded from www.ScooterTime.net