Open as PDF
8 Install the spring with the smaller pitch fac-
8 Before installing the collar, lubricate its O-
ring with grease.
8 Press down the collar/O-ring, adjust the
stopper ring so that it fits into the inner tube’s
INSTALLING THE FRONT FORK LEGS
The following procedure applies to both of the
front fork legs.
8front fork leg
8stopper ring 1
Pull up the inner tube until it stops, then install
the stopper ring.
8lower bracket pinch bolt 2
26Nm (2.6m • kgf, 18.8ft • lbf)
Refer to “FRONT WHEEL AND BRAKE
8brake hose holder 1
Refer to “FRONT BRAKE”.
8leg shield 1
Refer to “COVER AND PANEL” in chap-
Downloaded from www.ScooterTime.net