Filter
Top Products
ENG
5-26
5. Measure:
8valve margin thickness a
Out of specification J Replace the valve.
Valve margin thickness (intake)
0.7mm (0.028in)
Valve margin thickness (exhaust)
1.0mm (0.039in)
VALVES AND VALVE SPRINGS
6. Measure:
8valve stem runout
Out of specification J Replace the valve.
TIP
8 When installing a new valve, always replace
the valve guide.
8 If the valve is removed or replaced, always
replace the oil seal..
Valve stem runout
0.01mm (0.0004in)
Downloaded from www.ScooterTime.net