CHAS
4-8
1
2
3
1
2
FRONT WHEEL AND BRAKE DISK
EAS00542
INSTALLING THE FRONT WHEEL
1. Lubricate:
8wheel axle
8wheel bearings
8oil seal lip
8speedometer gear unit
Recommended lubricant
Lithium-soap-based grease
2. Install:
8speedometer gear unit 1
TIP
Make sure the speedometer gear unit and the
wheel hub are installed with the two projections
2 meshed into the speedmeter clutch 3 re-
spectively.
3. Install:
8front wheel
TIP
Make sure the slot 1 in the speedometer gear
unit fits over the stopper 2 on the outer tube.
4. Tighten:
8wheel axle
70Nm (7.0m • kgf, 50.6ft • lbf)
NOTICE
Before tightening the wheel axle nut, push
down hard on the handlebar several times
and check if the front fork rebounds
smoothly.
5. Install:
8speedometer cable
4Nm (0.4m • kgf, 2.9ft • lbf)
T
R
.
.
T
R
.
.
Downloaded from www.ScooterTime.net