CHAS
4-51
1
3
2
HANDLEBAR
1
EAS00666
REMOVING THE HANDLEBAR
1. Stand the scooter on a level surface.
WARNING
Securely support the scooter so that there
is no danger of it falling over.
2. Remove:
8leg shield 1
8leg shield 2
Refer to “COVER AND PANEL” in chap-
ter 3.
8rear view mirror (left and right)
8brush guard (left and right)
8band
3. Disconnect:
8brake master cylinder
Refer to “FRONT BRAKE”.
4. Remove:
8front turn signal light (right)
8right handlebar switch 1
8throttle cable assembly 2
8throttle grip assembly 3
TIP
While removing the right handlebar switch, pull
back the rubber cover.
5. Remove:
8rear brake cable
8brake light switch (rear)
8front turn signal light (left)
8left lever holder
8handlebar grip 1
8upper handlebar holder
8handlebar
TIP
Blow compressed air between the handlebar and
the handlebar grip, and gradually push the grip
off the handlebar.
Downloaded from www.ScooterTime.net