ENG
5-43
2
1
3
1
2
3
1
2
3
BELT DRIVE
EAS00318
REMOVING THE SECONDARY SHEAVE AND
V-BELT
1. Remove:
8secondary sheave nut 1
8clutch housing 2
TIP
While holding the clutch housing with the sheave
holder 3, loosen the secondary sheave nut.
Sheave holder
90890-01701 (YS-01880-A)
EAS00317
REMOVING THE PRIMARY SHEAVE
1. Remove:
8V-belt case
8Refer to “V-BELT CASE”.
2. Remove:
8primary fixed sheave nut 1
8plate washer
8oneway clutch
8primary fixed sheave 2
TIP
While holding the primary fixed sheave with the
rotor holding tool 3, loosen the primary fixed
sheave nut.
Rotor holding tool
90890-01235 (YU-01235)
2. Loosen:
8clutch carrier nut 1
NOTICE
Do not remove the clutch carrier nut at this
stage.
Downloaded from www.ScooterTime.net