Filter
Top Products
CHAS
4-63
2
1
1
2
T
R
.
.
T
R
.
.
EAS00699
INSTALLING THE REAR SHOCK AB-
SORBER ASSEMBLIES
1. Install:
8rear shock absorber assembly upper nuts
1
30Nm (3.0m • kgf, 21.7ft • lbf)
8rear shock absorber assembly lower bolts
2
18Nm (1.8m • kgf, 13.0ft • lbf)
REAR SHOCK ABSORBER ASSEMBLIES AND
SWINGARM
EAS00702
REMOVING THE SWINGARM
1. Stand the scooter on a level surface.
WARNING
Securely support the scooter so that there
is no danger of it falling over.
TIP
Place the scooter on a suitable stand so that
the rear wheel is elevated.
2. Disconnect:
8O
2
sensor coupler
3. Remove:
8muffler
4. Remove:
8rear wheel axle nut 1
8rear shock absorber assembly lower bolt
(right) 2
5. Remove:
8swingarm
Downloaded from www.ScooterTime.net