Filter
Top Products
3-23
CHK
ADJ
1
2
143 2
1
CHANGING THE ENGINE OIL
T
R
.
.
T
R
.
.
EAS00076
CHANGING THE ENGINE OIL
1. Start the engine, warm it up for several min-
utes, and then turn it off.
2. Place a container under the engine oil drain
bolt.
3. Remove:
8engine oil filler cap 1
8engine oil drain bolt 2
(along with the gasket)
4. Drain:
8engine oil
(completely from the crankcase)
5. If the oil filter element is also to be replaced
or cleaned, perform the following procedure.
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Remove the oil strainer cover 1,spring 3
and oil filter element 4.
b. Replace the new O-ring 2.
c. Install the new or clean oil filter element and
the oil strainer cover.
Oil strainer cover
20Nm(2.0m • kgf, 14.5ft • lbf)
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
6. Install:
8engine oil drain bolt
(along with the gasket)
20Nm(2.0m • kgf, 14.5ft • lbf)
7. Fill:
8crankcase
(with the specified amount of the recom-
mended engine oil)
Downloaded from www.ScooterTime.net