Open as PDF
DISASSEMBLING THE CRANKCASE
8crankcase bolts 1
Loosen each bolt 1/4 of a turn at a time, in stages
and in a crisscross pattern. After all of the bolts
are fully loosened, remove them.
8right crankcase 1
Tap on one side of the crankcase with a soft-
2. Tap only on reinforced
portions of the crankcase, not on the
crankcase mating surfaces. Work slowly and
carefully and make sure the crankcase
halves separate evenly.
Downloaded from www.ScooterTime.net