CHAS
4-5
1
2
4
3
5. Replace:
8wheel bearings
New
8oil seal
New
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Clean the outside of the front wheel hub.
b. Remove the oil seal 1 with a flat-head
screwdriver.
TIP
To prevent damaging the wheel, place a rag 2
between the screwdriver and the wheel surface.
c. Remove the wheel bearings 3 with a gen-
eral bearing puller 4.
d. Install the new wheel bearings and oil seal
in the reverse order of disassembly.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
FRONT WHEEL AND BRAKE DISK
Downloaded from www.ScooterTime.net