Filter
Top Products
3-11
CHK
ADJ
ADJUSTING THE VALVE CLEARANCE
e. Measure the valve clearance again.
f. If the valve clearance is still out of specifi-
cation, repeat all of the valve clearance ad-
justment steps until the specified clearance
is obtained.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
5. Install:
8breather
7Nm (0.7m • kgf, 5.1ft • lbf)
8valve cover (intake and exhaust)
7Nm (0.7m • kgf, 5.1ft • lbf)
8ignition coil
7Nm (0.7m • kgf, 5.1ft • lbf)
8spark plug
13Nm (1.3m • kgf, 9.4ft • lbf)
6. Install:
8front cover
8battery box cover
Refer to “COVER AND PANEL”.
T
R
.
.
T
R
.
.
T
R
.
.
T
R
.
.
Downloaded from www.ScooterTime.net