Filter
Top Products
CHAS
4-53
1
2
1
HANDLEBAR
T
R
.
.
EAS00673
INSTALLING THE HANDLEBAR
1. Stand the scooter on a level surface.
WARNING
Securely support the scooter so that there
is no danger of it falling over.
2. Install:
8handlebar 1
8 upper handlebar holders 2
28Nm(2.8m • kgf, 20.3ft • lbf)
NOTICE
First, tighten the bolts on the front side of
the handlebar holders, and then on the rear
side.
TIP
8 The upper handlebar holders should be in-
stalled with the arrow marks a facing for-
ward A.
8 Align the match marks b on the handlebar
with the upper surface of the handlebar
lower holder.
3. Install:
8 left lever holder 1
TIP
Align the projection a on the left handlebar
switch with the hole b in the handlebar.
4. Install:
8 handlebar grip
TIP
Before installing the handlebar grip, apply the
bond.
Downloaded from www.ScooterTime.net