Yamaha YW125Y_ Utility Trailer User Manual


 
CHAS
4-15
2
1
a
a
a
a
2. Measure:
8brake shoe lining thickness a
Out of specification Replace.
Brake shoe lining thickness limit
(minimum)
1.0mm (0.04in)
WARNING
Do not allow oil or grease to contact the
brake shoes.
TIP
Replace the brake shoes as a set, if either is
worn to the wear limit.
REAR WHEEL AND REAR BRAKE
3. Measure:
8brake drum inside diameter b
Out of specification Replace the wheel.
Brake drum inside diameter limit
(maximum)
151mm (5.94in)
4. Check:
8brake drum inner surface
Oil deposits Clean.
Remove the oil with a rag soaked in lac-
quer thinner or solvent.
Scratches Repair.
Lightly and evenly polish the scratches
with an emery cloth.
5. Check:
8brake camshaft
Damage/wear Replace.
EAS00570
ASSEMBLING THE BRAKE SHOES
1. Install:
8O-rings
New
8brake camshaft 1
8brake shoe wear indicator 2
Downloaded from www.ScooterTime.net