Filter
Top Products
CHAS
4-45
FRONT FORK
1
2
3
EAS00658
ASSEMBLING THE FRONT FORK LEGS
The following procedure applies to both of the
front fork legs.
WARNING
88
88
8 Make sure the oil levels in both front fork
legs are equal.
88
88
8 Uneven oil levels can result in poor han-
dling and a loss of stability.
TIP
8 When assembling the front fork leg, be sure
to replace the following parts:
- oil seal
8 Before assembling the front fork leg, make
sure all of the components are clean.
1. Install:
8damper rod assembly 1
8rebound spring 2
NOTICE
Allow the damper rod assembly to slide
slowly down the inner tube
33
33
3 until it
protrudes from the bottom of the inner tube.
Be careful not to damage the inner tube.
2. Lubricate:
8inner tube’s outer surface
Recommended lubricant
Fork oil 10W or equivalent
3. Tighten:
8copper washer
New
8damper rod assembly bolt 1
20Nm (2.0m • kgf, 14.5ft • lbf)
LOCTITE
®
T
R
.
.
Downloaded from www.ScooterTime.net