Filter
Top Products
SMART-MR10/15 User Manual Rev 5 99
B.8 NTRIPCASTER Set NTRIP caster
This command sets the NTRIP caster that will provide corrections to the receiver (SMART-MR15
only).
Abbreviated ASCII Syntax: Message ID: 8230
ntripcaster <address> <port>
ASCII Example:
ntripcaster www.igs-ip.net 80
Field Data Description
Binary
Bytes
Binary
Format
Binary
Offset
1 NTRIP
CASTER
header
This field contains the command name or
the message header depending on whether
the command is abbreviated ASCII, ASCII or
binary, respectively.
- - 0
2 address IP address or domain name of caster
[mandatory]
32 Char H
3 port Caster port (default 2101) 4 Ulong H+32