Filter
Top Products
SMART-MR10/15 User Manual Rev 5 21
Chapter 1 Introduction
The SMART-MR10/15 are rugged dual-constellation, dual-frequency smart antennas designed for on-
machine applications in the agricultural, construction and industrial market segments. They both
consist of a high-performance GNSS receiver and antenna, capable of receiving and tracking different
combinations of GPS+GLONASS L1+L2 code and carrier signals, and L-band signals, on a
maximum of 72 channels. Once you connect the SMART-MR10 or SMART-MR15 to a vehicle, they
begin operating as a fully functional GNSS system.
The SMART-MR10/15 support the following position modes:
• Autonomous
• SBAS (Satellite Based Augmentation Systems), including WAAS, EGNOS, and MSAS.
• DGPS
• OmniSTAR VBS/HP/XP
• CDGPS
• NovAtel GL1DE®, RT-20®, RT-2™ and RT-2L
For more information about the above, refer to the Support page on the NovAtel website at:
www.novatel.com
.
1.1 Features
1.1.1 SMART-MR10
The main features of the SMART-MR10 are as follows:
• Enhanced high performance GPS+GLONASS L1+L2 and L-band receiver (NovAtel
OEMV-3™)
• High performance GPS+GLONASS L1+L2 and L-band antenna
• Emulated Radar output
• CAN port
• Three (3) RS-232 COM ports, one of which can be configured with flow control, or user-
switched to RS-422
• Rugged, water and dust tight enclosure, consisting of a cast aluminum base and plastic radome
• Bluetooth version 2.0
• Three (3) daylight viewable status LED indicators
• Range of installation options, including a quick-release mounting plate and a 5m power/data
cable with tinned/tagged wires