Filter
Top Products
SMART-MR10/15 User Manual Rev 5 85
A.4.2 Streamlined Cable (Part Number 01018526)
The SMART-MR10/15 streamlined cable, chemical resistant, designed for reduced size and weight,
and increased flexibility, provides:
• Connection to a battery while operating in the field. The exposed wires (red for positive and black
for negative) can be connected to a 12 or 24V vehicular power circuit (or equivalent), which must
be protected by a user-supplied 5A fuse (NovAtel recommends an automotive blade-type fuse
rated for 5A with an operating voltage of more than 36 V).
• Two DB-9 connectors. One of these is normally connected to a PC/laptop serial (RS-232)
communication port and the other to a modem or radio transmitter to propagate differential
corrections (refer to your user-supplied modem or radio transmitter user guide for more
information on its connectors).
• One pair of bare wires, where the outer insulation is cut away but the wires beneath are intact, are
provided for emulated radar. See Table 12 on page 86 for their pinouts. For more information on
mating connectors and part numbers, see Table 13 on page 87.
This cable is RoHS compliant.
Figure 37: SMART-MR10/15 Streamlined Cable
COM1
ER
User supplied
5A fast blow fuse
Tyco 23-pin
connector
SMART-MR10: COM2
SMART-MR15: AUX