Filter
Top Products
92 SMART-MR10/15 User Manual Rev 5
B.4 CELLSET Set the APN name
This command allows the user to set the APN name (SMART-MR15 GSM/GPRS/HSDPA only). The
APN (Access Point Name) identifies the IP packet data network (PDN) with which the mobile data
user wants to communicate. Once a context and IP address are acquired, changing the APN through
the CELLSET command won't force that context to be dropped. The modem needs to be reset through
a receiver RESET command for the new APN to take effect.
Abbreviated ASCII Syntax: Message ID: 8212
CELLSET [parameter] [value]
ASCII Examples:
Set the APN name. The factory default APN name is blank.
cellset apn internet.com
Set the user name, if provided by the carrier. The factory default user name is blank.
cellset user <user_name>
Set the password, if provided by the carrier. The factory default password is blank.
cellset password <password>
Field Data Description
Binary
Bytes
Binary
Format
Binary
Offset
1 CELLSET
header
This field contains the command name or the
message header depending on whether the
command is abbreviated ASCII, ASCII or
binary, respectively.
- - 0
2 parameter Parameter name (APN name, User name or
Password) [mandatory]
12 Char H
3 value Parameter value (APN name, User name or
Password)
100 Char H+12