Filter
Top Products
SMART-MR10/15 User Manual Rev 5 79
A.3 SMART-MR15 Specifications
INPUT/OUTPUT CONNECTORS
SMART-MR15 Power
+9 to +36 V DC at 4.5 W (typical)
a
For the cable pinouts and drawings, see Connector Cables starting on
page 83 and Streamlined Cable (Part Number 01018526) starting on
page 85.
Serial Com Ports Using the MODE pin (refer to Table 5 on page 35), SMART-MR15 can
be configured with two serial ports. COM1 is available as RS-232 with
flow control or as RS-422. AUX is available as RS-232 with no flow
control.
All ports are configurable to a maximum of 230,400 bps.
Cellular modules CDMA and GSM/GPRS/HSDPA
CAN SAE J1939/ ISO 11783/ ISO 11898 Compliant (at 250 kbps)
Emulated Radar Output ER operates on distinct frequencies (26.11, 28.12 or 36.11 Hz/km/hr,
with 36.11 Hz/km/hr being the default value), with an effective range
from 1 km/hr to 55 km/hr for near-horizontal applications.
Refer to Emulated Radar (ER) on page 40 for further information.
PPS Output 3.3 V CMOS Logic Compatible
MKI Input 3.3 V CMOS Logic/ 5 V Tolerant
EMI/EMC
Emissions FCC, CE, Industry Canada
Immunity CE, ISO 7637, ISO 15003
LED INDICATORS
More details can also be found in Section 2.3.2, Status Indicators starting on page 37
PHYSICAL
Size 233 mm x 223 mm x 90 mm height
Weight 2.1 kg maximum
ENVIRONMENTAL
Operating Temperature
-40C to +65C (CDMA)
-40C to +65C (GSM/GPRS/HSDPA)
Storage Temperature -40C to +85C
Humidity Not to exceed 95% non-condensing
Immersion MIL-STD-810G Method 512.5, IEC 60529 IPX7
UV Protection IEC 60950-22 Section 5.8.2 Test Method IEC 68-2-5
Salt Fog IEC 60950-22 Section 8.3
Continued on the following page