Filter
Top Products
SMART-MR10/15 User Manual Rev 5 75
A.2 SMART-MR10 Specifications
INPUT/OUTPUT CONNECTORS
SMART-MR10 Power
+9 to +36 V DC at 2.5 W (typical while logging)
a
For the cable pinouts and drawings, see Connector Cables starting on
page 83 and Streamlined Cable (Part Number 01018526) starting on
page 85.
Serial Com Ports Using the MODE pin (refer to Table 3 on page 34), SMART-MR10 can
be configured with 2 or 3 serial ports.
COM1 is available in RS-232 with and without flow control or as RS-
422. COM2 is available with no flow control. AUX is available only
when COM1 is used as RS-232 with no flow control.
All ports are configurable to a maximum of 230,400 bps.
CAN SAE J1939/ ISO 11783/ ISO 11898 Compliant (at 250 kbps)
Emulated Radar Output ER operates on distinct frequencies (26.11, 28.12 or 36.11 Hz/km/hr,
with 36.11 Hz/km/hr being the default value), with an effective range
from 1 km/hr to 55 km/hr for near-horizontal applications.
Refer to Emulated Radar (ER) on page 40 for further information.
PPS Output 3.3 V CMOS Logic Compatible
MKI Input 3.3 V CMOS Logic/ 5 V Tolerant
EMI/EMC
Emissions FCC, CE, Industry Canada
Immunity CE, ISO 7637, ISO 15003
LED INDICATORS
More details can also be found in Section 2.3.2, Status Indicators starting on page 37
PHYSICAL
Size 233 mm x 223 mm x 90 mm height
Weight 1.9 kg maximum
ENVIRONMENTAL
Operating Temperature -40C to +70C
Storage Temperature -55C to +90C
Humidity Not to exceed 95% non-condensing
Immersion MIL-STD-810G Method 512.5, IEC 60529 IPX7
Continued on the following page