Filter
Top Products
Installation Chapter 2
SMART-MR10/15 User Manual Rev 5 31
2.2 Mounting the SMART-MR10/15
When installing the SMART-MR10 or SMART-MR15:
• Choose a location that has a clear view of the sky so that each satellite above the
horizon can be tracked without obstruction.
• Mount the SMART-MR10 or SMART-MR15 on a secure, stable structure capable
of safe operation in the specific environment. A typical installation is on the vehicle
roof.
2.3 Cabling the SMART-MR10/15
1. Connect the cable to the SMART-MR10 or SMART-MR15 connector, shown in Figure 7 below.
Route the cable to the other system components and secure it. If you are using the NovAtel
streamlined cable, the system is as illustrated in Figure 8, SMART-MR10 Streamlined Cabling on
page 32 and Figure 9, SMART-MR15 Streamlined Cabling on page 33. The pinouts for the
SMART-MR10/15 connector are described in Table 3, SMART-MR10 Connector Pin-Out on page
34 and Table 5, SMART-MR15 Connector Pin-Out on page 35.
Figure 7: SMART-MR10/15 Connector