Filter
Top Products
Bluetooth® Configuration Chapter 5
SMART-MR10/15 User Manual Rev 5 69
Figure 27: Bluetooth Configuration (SMART-MR15)
Bluetooth wireless technology is configured on the SMART-MR10 or SMART-MR15 COM3 port
and, by default, is enabled.
If Bluetooth wireless technology has been disabled, you will need to enable it before you can use it.
From a computer/laptop, connect to a SMART-MR10 or SMART-MR15 serial port. Open
communication with the receiver using HyperTerminal or Connect. See Appendix B.2, BTCONTROL
Enable/Disable Bluetooth wireless technology starting on page 90 for further information. Once your
computer/laptop is configured for Bluetooth operation, you will be able to communicate with the
SMART-MR10 or SMART-MR15 through Bluetooth wireless technology.
If the SMART-MR10 or SMART-MR15 is turned off (or power is removed) then
turned back on, the Bluetooth mode is returned to the state it was in before power-
down, as long as the SAVECONFIG command was issued before the unit was
powered off. When you issue a FRESET command, COM3 defaults to Bluetooth
mode.
SMART-MR15
CPU
Bluetooth
Module
DB9 Labeled COM1COM1
COM2
AUX
COM3
DB9 Labeled AUX
SMART-MR15 Enclosure
Cellular
Module