Filter
Top Products
SMART-MR10/15 User Manual Rev 5 115
C.5 CELLSTATUS Cellular Modem and Network Status
Information
This log displays the current status of the cellular modem and the network connection.
Message ID: 8209
Log Type: Asynch
Recommended Input:
log cellstatusa onchanged
Field # Field Type Data Description Format
Binary
Bytes
Binary
Offset
1 CELLSTATUS
header
Log header H 0
2 status Current modem status Char 16 H
3 net status Registration status of the modem on
the network.
Char 16 H+16
4 ip address Network-assigned IP address (for
example, 10.0.0.1)
Char 16 H+32
5 signal Signal strength as number of bars
(1-4)
Uint 4 H+48
6 rssi RSSI (dBm) Int 4 H+52
7 network Network identification string or NID
(example “Verizon”, “125”)
Char 20 H+56
8 cellid Base station cell identifier Uint 4 H+76
9Reserved
10 disconnects Number of socket disconnects since
startup
Uint 4 H+96
11 temperature Modem temperature, if available,
otherwise 0
Int 4 H+100
12
last error
a
a. The last error field is cleared when the cellular modem:
- enters the ENABLED state,
- enters the PROVISIONING state or
- changes from the BOOTING state to the CONFIGURING state.
The last error message persists until one of these state changes occurs.
For CME error explanations, refer to:
CDMA www.telit.com/en/products/cdma.php?p_ac=show&p=16
(Telit CC864 DUAL AT Reference
Guide rev. 4) or
HSPA www.telit.com/en/products/umts-hsdpa.php?p_ac=show&p=13
(Telit UC864 AT Reference
Guide rev. 8)
Last recorded modem error Char 40 H+104