Filter
Top Products
60 SMART-MR10/15 User Manual Rev 5
Chapter 4 PC Utilities
When converting to RINEX, two files are produced - a RINEX observation file and a RINEX
navigation file. A third GLONASS file is produced if the data contains GLONASS observations. The
default names of these files conform to the RINEX Version 2.10 recommended naming convention of
ssssdddf.yyt, where:
ssss 4 character station name - Convert4 uses the first four characters of the <infile>
parameter as the station ID
ddd day of year
f file sequence number within the day - Convert4 sets this to zero
t file type: o for the observation and n for the navigation file
Selecting the RINEX field, see Figure 17, Convert4 Screen Examples on page 59, in the Convert4 To
section causes the:
1. Destination File: field to be replaced by the Observation File: and Ephemeris File: fields. Note
that Observation File refers to the RINEX OBS file while Ephemeris File refers to the RINEX
NAV file.
2. RINEX Headers buttons to appear allowing you to supply additional information that appears in
the header records of the RINEX output files (for example, Company Name, Marker Name and
Marker Number).
For best results, the NovAtel receiver input data file should contain the logs as in Table 10, NovAtel
Logs for RINEX Conversion on page 60.
Table 10: NovAtel Logs for RINEX Conversion
NovAtel OEMV Family Log Recommended Trigger
RANGEA/B, or
RANGECMPA/B
ontime 1
BESTPOSA/B, or
PSRPOSA/B, or
RTKPOSA/B, or
MARKPOSA/B
once
IONUTCA/B onchanged
RAWEPHEMA/B onchanged
GLORAWEPHEMA/B onchanged
VERSIONA/B
a
a. Information from this log overrides data entered into the Receiver
Number, Type and Version fields using the OBS file button of the
RINEX Headers section, see Figure 17 on page 59.
once