Filter
Top Products
SMART-MR10/15 User Manual Rev 5 17
Foreword
Foreword
Congratulations!
Congratulations on your purchase. Your smart antenna is capable of receiving GPS L1+L2,
GLONASS L1+L2, and L-band signals, with exceptional flexibility and performance. The
SMART-MR15 also includes an integrated cellular modem for access to wireless RTK corrections
with minimal effort.
NovAtel is an industry leader in state-of-the-art Global Navigation Satellite Systems (GNSS) receiver
design. We believe that our product will meet your high expectations, and are working hard to ensure
that future products and enhancements maintain this level of satisfaction.
This is your primary hardware and software reference.
Scope
This manual provides sufficient detail to allow you to effectively integrate and fully operate your
SMART-MR10/15. The information in this manual is a companion to the information in the OEMV
Firmware Reference Manual and the OEMV Installation and Operation User Manual.
After the addition of accessories and a power supply, your smart antenna is ready to go.
SMART-MR10/15 utilize a comprehensive user-interface command structure, which require
communication through communications (COM) ports. The manual describes commands and logs
specific to the SMART-MR10/15, For more information, see Commands starting on page 88 and Logs
starting on page 110.
Other supplementary manuals are available on the accompanying CD and on our website at
www.novatel.com/support/firmware-software-and-manuals/product-manuals-and-doc-updates/
, to aid
you in using the other commands and logs available in the OEMV family of receivers.
PC Utilities are also described, see Chapter 4 starting on page 57. Integrated with Connect software,
these utilities provide graphical user interfaces for logging to a PC/laptop, upgrading, and converting
data types.
Prerequisites
The installation chapters of this document provide information concerning installation requirements
and considerations for SMART-MR10/15. To run the PC software supplied, your personal computer
must meet or exceed this minimum configuration:
• Windows-compatible mouse or pointing device and SVGA display
Although previous experience with Windows is not necessary to use Connect, familiarity with certain
actions that are customary in Windows will assist in the use of the program. This manual has been
written with the expectation that you already have a basic familiarity with Windows.