Filter
Top Products
Operation Chapter 3
SMART-MR10/15 User Manual Rev 5 49
Figure 15: Basic Differential Setup
Reference Description
1 Receiver
2 User-supplied 5A fuse
3 User-supplied power supply, for example a battery
4 User-supplied device to COM1
5 User-supplied radio device to COM2 (SMART-MR10 only)
6 User-supplied PC/laptop, for setting up and monitoring, to COM1
7 Cellular Antenna (SMART-MR15 only)
System biases can introduce errors. Refer to the Support page on the NovAtel website at
www.novatel
.com for more information. In most cases you need to provide a data link between the
base station and rover station (two NovAtel receivers) in order to receive corrections. The application
of SBAS corrections to a single receiver are an exception to the base/rover concept. Generally, a link
capable of data throughput at a rate of 9600 bits per second, and less than 4.0 s latency, is
recommended.
Once your base and rover are set up, you can configure them as outlined in the configuration examples
in 3.3.1, Base Station Configuration on page 50 and 3.3.2, Rover Station Configuration on page 51.
1
1
2
2
3
3
4
5
5
6
7
Base
Rover