Filter
Top Products
Garmin G1000 Pilot’s Guide for the Beechcraft A36/G36
190-00595-01 Rev. B52
FLIGHT INSTRUMENTS
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
NOTE: Refer to the Pilot’s Operating Handbook (POH) and FAA Approved Airplane Flight Manual (AFM) for
speed criteria and Vspeed values.
Changing Vspeeds and turning Vspeed flags on/off:
1) Press the
TMR/REF
Softkey.
2) Turn the
large FMS
Knob to highlight the desired Vspeed.
3) Use the small FMS Knob to change the Vspeed in 1-kt increments (when a speed has been changed from a
default value, an asterisk appears next to the speed).
4) Press the
ENT
Key or turn the large FMS Knob to highlight the ON/OFF field
5) Turn the
small FMS
Knob clockwise to ON or counterclockwise to OFF.
6) To remove the window, press the
CLR
Key or the
TMR/REF
Softkey.
Figure 2-7 Vspeed References
(Timer/References Window)
Vspeed flags can be turned on or off and values restored all at once.
Modifying Vspeeds (on, off, restore defaults):
1) Press the
TMR/REF
Softkey.
2) Press the
MENU
Key.
3) Turn the FMS Knob to highlight the desired selection.
4) Press the
ENT
Key.
5) To remove the window, press the CLR Key or the TMR/REF Softkey.
Figure 2-8 Page Menu
(Timer/References Window)