Filter
Top Products
190-00595-01 Rev. B
Garmin G1000 Pilot’s Guide for the Beechcraft A36/G36
7
SYSTEM OVERVIEW
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& cNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
1
NAV VOL/ID Knob
Turn to control NAV audio volume (shown in the NAV Frequency Box as a percentage)
Press to toggle Morse code identifier audio ON/OFF
2
NAV Frequency Trans-
fer Key
Transfers the standby and active NAV frequencies
3
NAV Knob
Turn to tune NAV receiver standby frequencies (large knob for MHz; small for kHz)
Press to toggle light blue tuning box between NAV1 and NAV2
4
Heading Knob
Turn to manually select a heading. When operating in Heading Select mode, this knob pro-
vides the heading reference to the flight director.
Press to display a digital heading momentarily to the left of the HSI and synchronize the
Selected Heading to the current heading
5
Joystick
Turn to change map range
Press to activate Map Pointer for map panning
6
CRS/BARO Knob
Turn large knob for altimeter barometric pressure setting
Turn the small knob to set the pilot-selected course on the HSI when the VOR1, VOR2, or
OBS/SUSP mode is selected. Pressing this knob centers the CDI on the currently selected
VOR. The pilot-selected course provides course reference to the pilot-side flight director
when operating in Navigation and Approach modes.
Press to re-center the CDI and return course pointer directly TO bearing of active waypoint/
station
7
COM Knob
Turn to tune COM transceiver standby frequencies (large knob for MHz; small for kHz)
Press to toggle light blue tuning box between COM1 and COM2
The selected COM (green) is controlled with the COM MIC Key (Audio Panel).
8
COM Frequency Trans-
fer Key (EMERG)
Transfers the standby and active COM frequencies
Press and hold two seconds to tune the emergency frequency (121.5 MHz) automatically into
the active frequency field
9
COM VOL/SQ Knob
Turn to control COM audio volume level (shown as a percentage in the COM Frequency
Box)
Press to turn the COM automatic squelch ON/OFF
10
Direct-to Key ( )
Activates the direct-to function and allows the user to enter a destination waypoint and es
-
tablish a direct course to the selected destination (specified by identifier, chosen from the
active route)
11
FPL Key
Displays flight plan information
12
CLR Key
(DFLT MAP)
Erases information, cancels entries, or removes menus
Press and hold to display the MFD Navigation Map Page (MFD only).
13
MENU Key
Displays a context-sensitive list of options for accessing additional features or making setting
changes
14
PROC Key
Gives access to IFR departure procedures (DPs), arrival procedures (STARs), and approach
procedures (IAPs) for a flight plan or selected airport
15
ENT Key
Validates/confirms menu selection or data entry