Filter
Top Products
190-00595-01 Rev. B
Garmin G1000 Pilot’s Guide for the Beechcraft A36/G36
12
SYSTEM OVERVIEW
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
1.4 SECURE DIGITAL CARDS
NOTE:
Refer to the Appendices for instructions on updating the aviation database.
NOTE:
Ensure that the G1000 system is powered off before inserting the SD card.
The GDU 1040 and GDU 1043/1045 data card slots use Secure Digital (SD) cards and are located on the top
right portion of the display bezels. Each display bezel is equipped with two SD card slots. SD cards are used for
aviation database and system software updates as well as terrain database storage.
Install an SD card
Insert the SD card in the SD card slot, pushing the card in until the spring latch engages. The front of the card
should remain flush with the face of the display bezel.
Remove an SD card
Gently press on the SD card to release the spring latch and eject the card.
Figure 1-6 Display Bezel SD Card Slots
SD Card Slots
1.5 SYSTEM POWER-UP
NOTE: Refer to the Appendices for AHRS initialization bank angle limitations.
NOTE: See the Appendices for additional information regarding system-specific annunciations and alerts.