Filter
Top Products
Garmin G1000 Pilot’s Guide for the Beechcraft A36/G36
190-00595-01 Rev. B170
FLIGHT MANAGEMENT
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
USER WAYPOINTS
The G1000 can create and store up to 1,000 user-defined waypoints. User waypoints can be created from
any map page (except PFD Inset Map, AUX-Trip Planning Page, or Procedure Pages) by selecting a position on
the map using the Joystick, or from the User Waypoint Information Page by referencing a bearing/distance
from an existing waypoint or bearing from two existing waypoints. Once a waypoint has been created, it can
be renamed, deleted, or moved.
Figure 5-42 User Waypoint Information Page
Selected User
Waypoint
Navigation Map
Showing Selected
User Waypoint
User Wpt Identifier
User Waypoint List
- Identifier
- Comment
User Wpt Info
- Region
- Lat/Long
Reference Wpt Info
- Identifier
- Radial/Distance
Softkeys
User Wpt Comment
# User Wpts Used
Displayed if User Wpt
created from map
page
Select a User Waypoint:
1) With the User Waypoint Information Page displayed, enter the name of the User Waypoint, or scroll to the
desired waypoint in the User Waypoint List using the large FMS Knob.
2) Press the ENT Key.
3) Press the
FMS
Knob to remove the flashing cursor.
Or:
1) With the Nearest User Waypoint Page displayed, press the FMS Knob
2) Press the ENT Key or turn either FMS Knob to select an identifier in the Nearest USR Box.
3) Press the FMS Knob to remove the flashing cursor.