Filter
Top Products
190-00595-01 Rev. B
Garmin G1000 Pilot’s Guide for the Beechcraft A36/G36
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
439
APPENDIX A
G1000 SYSTEM ANNUNCIATIONS
When a new message is issued, the
ALERTS
Softkey flashes to alert the flight crew of a new message. It
continues to flash until acknowledged by pressing the softkey. Active messages are displayed in white text.
Messages that have become inactive change to gray text. The
ALERTS
Softkey flashes if the state of a displayed
message changes or a new message is displayed. The inactive messages can be removed from the Message
Window by pressing the flashing
ALERTS
Softkey.
The G1000 System Messages convey messages to the flight crew regarding problems with the G1000 system.
Typically, a large red ‘X’ appears in a window when a related LRU fails or detects invalid data.
When an LRU or an LRU function fails, a large red ‘X’ is typically displayed on windows associated with
the failed data. The following section describes various system annunciations. Refer to the AFM/POH for
additional information regarding pilot responses to these annunciations.
NOTE
: Upon power-up of the G1000 system, certain windows remain invalid as G1000 equipment begins to
initialize. All windows should be operational within one minute of power-up. Should any window continue
to remain flagged, the G1000 system should be serviced by a Garmin-authorized repair facility.
Figure A-4 G1000 System Messages
Messages Window
Alerts Softkey
Annunciation
System
Annunciation
Red ‘X’