SERVICING THE AT10.1
64
3.6. ORDERING REPLACEMENT PARTS
To order replacement parts, please provide the following information for
each component:
• Circuit symbol from the schematic diagram (see Appendix)
• Factory part number and description, from the table below
• Model number and serial number of your battery charger
• Quantity required
Call your sales representative to place an order for spare parts or
replacement parts.
Table 3-1: REPLACEMENT PARTS
Factory Part Number
Symbol
Description
12 Vdc 24 Vdc 48 Vdc 130 Vdc
Rec.
Spares
A1 Main Control circuit board assembly EJ1243-10 Y
A5 Auxiliary Relay circuit board assembly EJ1243-03 Y
A3 Rectifier control circuit board EJ5093-00
A6 Rectifier (A3 + A16) / Heat Sink assembly EJ1243-00 Y
A7 DC Filter assembly See Table 3-2
A8
Battery Eliminator Filter assembly
(requires filtered charger)
EJ1155-00 EJ1155-01
A10 Temperature Compensation Probe assembly
See Appendix B, Table 2
A16 Rectifier SCR module EJ5094-00
C1 DC Output Filter capacitor RP0019-09 RP0019-08
Y
C2 Battery Eliminator Filter capacitor RP0019-09 RP0019-08
Y
C4 EMI filter capacitor See VR6/C4
C5 EMI filter capacitor See VR7/C5
CB1 AC breaker (standard) 120/208/240 Vac See Table 3-3
CB1 AC breaker (med. AIC) 120/208/240 Vac See Table 3-4
CB1 AC breaker (high AIC) 120/208/240 Vac See Table 3-5
CB1 AC circuit breaker (med. AIC) 480 Vac RE0171-00
CB1 AC circuit breaker (high AIC) 480 Vac RE0043-00
CB2 DC circuit breaker (standard) See Table 3-6
CB2 DC circuit breaker (medium AIC) See Table 3-7
CB2 DC circuit breaker (high AIC) See Table 3-8
CR1 Polarity diode EJ1243-04 Y
CR2 Blocking diode EJ1243-05