Cisco Systems AT10.1 Automobile Battery Charger User Manual


 
TABLE OF CONTENTS
2
1. RECEIVING THE AT10.1
1.1. STORING THE AT10.1
If you store the AT10.1 for more than a few days before installation, you
should store it in its original shipping container, and in a temperature
controlled, dry climate. Ambient temperatures of 32 to 122° F / 0 to 50° C
are acceptable. Storage should not exceed 2 years due to the limited shelf
life of the dc filter capacitors when they are not in service.
1.2. REPORTING SHIPPING DAMAGE
If, on delivery of the AT10.1 or related goods, you discover any damage
or shortage, make notation on all copies of delivering carrier's delivery
receipt before signing, and notify the delivery person of your findings. If
loss or damage is discovered after delivery, notify delivering carrier
immediately and request an inspection. The manufacturer does not assume
any liability for damage during transportation or handling.
Should the goods require an inspection by or return to the manufacturer,
please contact your sales representative for further instructions. Any
returned material must be properly packed in compliance with shipping
regulations. It is preferable to use the original shipping materials if
possible. Mark the outside of the shipping container with the Return
Material Authorization (RMA) number issued by the manufacturer.
1.3. UNPACKING AND INSPECTING THE AT10.1
Carefully remove all shipping materials from the AT10.1. Remove the
AT10.1 from the shipping pallet for inspection. Save all shipping
materials until you are sure that there is no shipping damage.
Once the AT10.1 is unpacked, inspect the unit for possible shipping
damage, using the checklist below. If shipping damage has occurred,
please refer to section 1.2 on this page for proper reporting.
INSPECTION CHECKLIST
o Enclosure exterior and interior are not marred or dented.
o There is no visible damage to exterior or interior components.
o All internal components are secure.
o Printed circuit boards are firmly seated on their standoffs.
o All hardware is tight.
o All wire terminations are secure.
o The User's Manual is included.
o You received all items on the packing list.