Cisco Systems AT10.1 Automobile Battery Charger User Manual


 
i
IMPORTANT SAFETY INSTRUCTIONS
1. Before using this equipment, read all instructions and cautionary
markings on: A) this equipment, B) battery, and C) any other equipment
to be used in conjunction with this equipment.
2. This manual contains important safety and operating instructions, and
therefore should be filed for easy access.
3. Remove all jewelry, watches, rings, etc. before proceeding with
installation or service.
4. Do not touch any uninsulated parts of this equipment, especially the
input and output connections, as there is the possibility of electrical
shock.
5. During normal operation, batteries may produce explosive gas. Never
smoke, use an open flame, or create arcs in the vicinity of this equipment
or the battery.
6. Maintain at least 6in / 152mm clearance from all obstructions on the top,
bottom and sides of this equipment. Allow sufficient clearance to open
the front panel for servicing.
7. Turn this equipment off before connecting or disconnecting the battery
to avoid a shock hazard and/or equipment damage.
8. Connect or disconnect the battery only when the battery charger is off to
prevent arcing or burning.
9. De-energize all ac and dc inputs to the battery charger before servicing.
10. Do not operate battery charger if it has been damaged in any way. Refer
to qualified service personnel.
11. Do not disassemble battery charger. Only qualified service personnel
should attempt repairs. Incorrect reassembly may result in explosion,
electrical shock, or fire.
12. Do not install the battery charger outdoors, or in wet or damp locations
unless specifically ordered for that environment.
PLEASE READ AND FOLLOW
ALL SAFETY INSTRUCTIONS