Filter
Top Products
ATCA-C110/1G Installation and Use Manual
Chapter 6 Memory Map and Registers
76
REVIEW COPY
Telecom CLK1 Buffer
Enable Signals
(Address: 0x38)
0 ATCA_CLK1A_EN
Enables the Clock to be sourced to the Backplane on the CLK1A
lines
0 - Disable
1 - Enable
1 ATCA_CLK1B_EN
Enables the Clock to be sourced to the Backplane on the CLK1B
lines
0 - Disable
1 - Enable
2 AMC1_CLK1_EN
Enables the Clock to be sourced to AMC Bay1
0 - Disable
1 - Enable
3 AMC2_CLK1_EN
Enables the Clock to be sourced to AMC Bay1
0 - Disable
1 - Enable
4 AMC3_CLK1_EN
Enables the Clock to be sourced to AMC Bay1
0 - Disable
1 - Enable
5 AMC4_CLK1_EN
Enables the Clock to be sourced to AMC Bay1
0 - Disable
1- Enable
6:7 Unused
Table 6-6. I
2
C to GPIO’s Device Mappings - ATMega8 Private I
2
C Bus
Device Address GPIO
Number
Description