Filter
Top Products
2 - 43
SPEC
CABLE ROUTING
Ê Clamp the air cleaner drain
hose, fuel tank breather hose,
drain hose, AI system hose, AI
system lead and AC magneto.
Route the air cleaner drain
hose, fuel tank breather hose
and drain hose outside the AI
system hose, AI system lead
and AC magneto lead. Route
the fuel tank reserve hose and
fuel tank drain hose under-
neath AC magneto lead and AI
system lead and then to the
outside.
Ë House all the leads in the rib of
the box battery.
Ì Clamp the oil level gauge, side
stand switch lead and radiator
hose.
Í Place the oil level gauge, side
stand switch lead and radiator
hose in the drive sprocket cover.
Î Do not pinch the hose.
Ï Pass the oil level gauge lead
and sidestand switch lead by
the inner side of the coolant
hose.
Ð Route the fuel tank breather
hose and fuel tank drain hoses
through the clamp and pass by
the outside of the bottom cowl-
ing. Make the end length of
hoses even.
Ñ Pass the fuel tank breather
hose and fuel tank drain hose
by the inner side of the coolant
hose. Do not pinch each hose
in the bottom cowling cowl
mounting section.
Ò Pass the air cleaner drain by the
inner side of the coolant hose
and release under the coolant
hose. However, do not place
out side of the bottom cowling.
Ó Route the air cleaner drain
hose, fuel tank breather hose,
fuel tank drain hose, AI system
hose and AI system lead
through the clamp.
Ô To turn signal light