Filter
Top Products
5 - 35
ENG
GENERATOR
WARNING
When the bolt are tightened more than the
specified angle, do not loosen the bolt and
then retighten it.
Replace the bolt with a new one and per-
form the procedure again.
CAUTION:
• Do not use a torque wrench to tighten the
bolt to the specified angle.
• Tighten the bolt until it is at the specified
angle.
NOTE:
When using a hexagon bolt, note that the
angle from one corner to another is 60°.
▲▲▲▲ ▲ ▲▲▲▲▲▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
4. Install:
• generator rotor cover
NOTE:
Tighten the generator rotor cover bolts in
stages and in a crisscross pattern.